Phụ kiện

Khoảng giá

Dòng sản phẩm

Hội nghị truyền hìnhMàn hình chuyên dụng Máy quay chuyên dụngMáy quay hệ thống
Phụ kiệnPhụ kiện máy quay

Hiển thị

thumbnail

Sắp xếp:

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

Hệ thống điều khiển Sony CCU-TX50P

Power requirements:	AC 100 to 240 V, 50/60 Hz
Power consumption:	130 VA (measured at maximum load at camera side 12 V, 4.8 A, cable length 300 m) Peak inrush current (1) Power ON, current probe method: 50 A (240 V) (2) Hot switching inrush current, measured in accordance with European standard DN55103-1: 10 A (230 W)
Cable length:	Max. 750 m (8.5 mm dia.)
Operating temperature:	5 °C to 40 °C (41 °F to 104 °F)
Storage temperature:	-20 °C to 55 °C (-4 °F to 131 °F)
Mass:	Approx. 5.5 kg (12 lb 2 oz)
Dimensions (W x H x D):	200 x 124 x 365 mm (8 x 5 x 13 7/8 inches)

Signal inputs

REFERENCE:	BNC type, loop-through, VBS/BS, 1.0 Vp-p, 75 ½
RETURN VIDEO:	1, 2, 3 (*1): BNC type loop-through, 1.0 Vp-p, 75½
PROMPTER VIDEO (*1):	BNC type, loop-through, 1.0 Vp-p, 75 ½

(*1) The same connector is shared for return-3 and teleprompter.

Signal outputs

VBS 1, 2, 3 (*2):	BNC type, 1.0 Vp-p, 75 ½
SDI 1, 2, 3 (*2):	BNC type, 270 Mb/s, 0.8 Vp-p, 75 ½

(*2) The same connector is shared for composite and SDI.

Y/R-Y/B-Y (*3):	BNC type, Y: 1.0 Vp-p, 75 ½, R-Y/B-Y: 525 mVp-p, 75 ½
R/G/B (*3):	BNC type, 0.7 Vp-p, 75 ½

(*3) The same connector is shared for component and R/G/B.

SYNC:	BNC type, 0.3 Vp-p, 75 ½
PIX:	BNC type, VBS, 1.0 Vp-p, 75 ½
WF:	BNC type, 700 mVp-p, 75 ½
Encoded output:	1.0 Vp-p, 75 ½
WF MODE:	4-pin
AUDIO:	XLR 3-pin, 0 dBu/-20 dBu, balanced, 2 channels

Camera control inputs/outputs

CAMERA:	Triax (Fischer type)
COAX:	BNC type, 75 ½
REMOTE:	10-pin, multi connector
INTERCOM/TALLY/PGM:	D-sub 25-pin, 4W/RTS/Clear-com selectable
TALLY:	DC 24 V, TTL level or contact selectable
MIC REMOTE:	D-sub 15-pin
INCOM (on the front panel):	XLR 5-pin

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

HD camera control unit Sony HDCU-1000

Operating temperature	+5 to +40 °C (+41 to +104 °F)
Mass	Approx. 16 kg (35 lb 4 oz)
Dimensions (W x H x D)	424 x 133 x 410 mm (16 3/4 x 5 1/4 x 16 1/4 inches)
Power requirements	AC 100/120/220 to 240 V, 50/60 Hz
Maximum current consumption	5.4 A (at 100 V AC, entire system active)

HD inputs/outputs

SDI output	BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P Outputs are selectable as HD SDI or SD SDI
Monitor output	BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P Outputs are selectable as HD SDI or SD SDI, character on/off selectable
Analogue composite monitor output	BNC type (1), character on/off selectable
HD SDI return input	BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P
SDI return input	BNC type (4), SMPTE 259M, Serial digital component
VBS return input	BNC type (4), NTSC/PAL

Sync

Reference input	BNC type (1, with loop-through), HD tri-level sync or SD black burst
Sync output	BNC type (1), HD tri-level sync or SD sync

Intercom/Tally/PGM

Intercom PD & ENG	D-sub 25-pin (1), 4W/RTS/CC selectable
PGM1/PGM2	0/-20 dBu selectable
R-Tally/GTally	24 V power in/make contact

Audio

MIC1/MIC2 output	XLR-3-31 type (2, female), 0/-20 dBu selectable
Digital audio output (AES/EBU)	BNC type (1), AES/EBU format, 20-bit/48 kHz
Embedded audio	Embedded audio to HD SDI/SD SDI

Prompter

Prompter in

BNC type (2, with loop-through), Analogue, NTSC/PAL/HD-Y

Others

RCP/MSU/CNU interface	8-pin (1), Sony Camera Command Network Protocol (for entire camera system control)
Ethernet	RJ-45 (1), 10BASE-T/100BASE-TX
Mic remote	D-sub 15-pin
WF mode	4-pin (2), Stair step (for SD composite Waveform monitor)
WF control	D-sub 15-pin (1), GPI (for SDI component WF control)
System expansion I/Q	D-sub 15-pin (1), GPI (for system control with external GPI interface)
Trunk line	D-sub 9-pin (1), RS-232C (remote line for CHU equipment), 12-pin (round type connector), RS-232C/422 (remote line for CHU equipment)

Camera

Optical fibre cable interface

SMPTE 304M based optical fiber connector (1), 1.5 gb/s optical fiber digit

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

HD Multi-Purpose Camera Sony HDCU-1500

Power requirements	AC 100 to 240 V, 50/60 Hz
Maximum current consumption	4 A (at 100 V AC, entire system active)
Operating temperature	-10 to +40 °C (+14 to +104 °F)
Mass	Approx. 6.2 kg (13 lb 10 oz)
Dimensions (W x H x D)	200 x 127 x 410 mm (8 x 5 1/9 x 16 1/4 inches)

HD inputs/outputs

SDI output	BNC type (2), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P HD SDI/SDI selectable
Monitor output	BNC type (1), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P HD SDI/SD SDI selectable
SDI return inputs	BNC type (3), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P HD SDI/SD SDI/VBS selectable

SD inputs/outputs

Analogue composite monitor output

BNC type (1), Monitor/Sync selectable, character on/off selectable

Sync

Reference input	BNC type (1, with loop-through), HD tri-level sync or SD black burst
Sync output	BNC type (1), HD tri-level sync or SD sync Sync/Monitor selectable

Intercom/Tally/PGM

Intercom PD & ENG	D-sub 25-pin (1), 4W/RTS/CC selectable
PGM1/PGM2	0/-20 dBu selectable
R-Tally/G-Tally	24 V power in/make contact

Audio

MIC1/MIC2 output	XLR-3-31 type (2, female), 0/-20 dBu selectable
Embedded audio	Embedded audio to HD SDI/SD SDI

Prompter

Prompter in

Analogue Video SD

Others

RCP/MSU/CNU interface	8-pin (1), Sony Camera Command Network Protocol (for entire camera system control)
Ethernet	RJ-45 (1), 10BASE-T/100BASE-TX
Mic remote	D-sub 15-pin
WF mode	4-pin (1), Stair step (for SD composite Waveform monitor)
WF control	D-sub 15-pin (1), GPI (for SDI component WF control) WF control/mic remote selectable
Trunk line	12-pin (round type connector), RS-232C/422 (remote line for CHU equipment)

Camera

Optical fibre cable interface

SMPTE 304M based optical fiber connector (1), 1.5 gb/s optical fiber digital transmission, SMPTE 292 M

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

Camera adaptor Sony CA-TX50P

Power requirements:	DC 12 V (DC 180 V when supplied via the CCU connector)
Power consumption:	CA (Internal): 7.3 W Max. 58 W (DC 12 V input) Max. 67 W (DC 180 V input)
Operating temperature:	-10 °C to 45 °C (14 °F to 113 °F)
Storage temperature:	-20 °C to 60 °C (-4 °F to 140 °F)
Mass:	Approx. 2.5 kg (5 lb 5 oz)
Dimensions (W x H x D):	206 x 212 x 131 mm (8 1/8 x 8 3/8 x 5 1/4 inches)

Signal inputs/outputs

CCU:	Triax (Fischer type)
CAMERA:	Pro 76-pin Digital
PROMPTER:	BNC type, 1.0 Vp-p, 75 ½
RETURN:	BNC type, 1.0 Vp-p, 75 ½
INTERCOM/PROGRAM:	XLR 5-pin (for Headset) Input level: -60 dBs (dynamic) Output level: -° to +12 dBs
AUDIO IN (CH-1/2):	XLR 3-pin (2), 600 ½, balanced Input level: Mic in: -60 dB Line in: -20 dB
DC IN:	XLR 4-pin, 10.5 V to 17 V
DC OUT:	4-pin, 10.5 V to 17 V, Max 1.5 A
EARPHONE:	Mini jack

Giá: Liên hệ

Bảo hành: 12 Tháng

Trả gópso sánh

PAL System Digital Camera Control Unit Sony CCU-D50P

Nguồn điện	AC 200/240 V, 50/60 Hz
Công suất :	Approx. 0.8 A
Nhiệt độ hoạt động:	5°C to 40°C (41°F to 104°F)
Nhiệt độ lưu trữ:	-20°C to 55°C (-4°F to 131°F)
Kích thước:	424 (W) 3 88 (H) 3 283 (D) mm (16 3/4 3 3 1/2 3 11 1/4 inches)
Trọng lượng:	6.3 kg (13 lb 14 oz)

Kết nối đầu vào/đầu ra

VBS đầu ra:	BNC (2) 1.0 Vp-p, 75 ½
R/G/B đầu ra:	BNC (1) 0.7 Vp-p, 75 ½
Y/R-Y/B-Y đầu ra:	BNC (1), Y: 1.0 Vp-p, 75 ½, R-Y/B-Y: 0.525 Vp-p, 75 ½
Y/C đầu ra:	BNC (1) Y: 1.0 Vp-p, 75 ½, C: 0.3 Vp-p, 75 ½
SYNC đầu ra:	BNC (1), 0.3 Vp-p, 75 ½
SDI đầu ra:	BNC (2), 270 Mb/s, 0.8 Vp-p, 75 ½
S-Video đầu ra	DIN 4-pin (1), Y: 1.0 Vp-p, 75 ½, C: 0.3 Vp-p, 75 ½
Giám sát đầu ra:	BNC (1) VBS:1.0Vp-p, 75½
Mic đầu ra:	XLR 3-pin (1), 600½
Genlock đầu vào:	BNC (1), loop-through, VBS or BBS, 1.0 Vp-p, 75½
SDI đầu vàot:	BNC (1), 270 Mb/s, 0.8 Vp-p, 75 ½
Return Video đầu vào:	BNC (1), loop-through, 1.0 Vp-p, 75 ½
Prompter Video đầu vào:	BNC (1), loop-through, 1.0 Vp-p, 75 ½
Camera:	Sony Z-type 26-pin (1)
Intercom/Tally:	D-sub 15-pin, 4W/2W selectable, R/G Tally, contact
Remote:	10-pin (1)